Peak Vises: Top class vises proudly made in the USA! All components of the Peak Vise are high quality stainless steel, hardened tool steel, and brass, with aluminum for the jaw tube link arm. The vise includes a set screw and…

A complete starter kit with vise & tools! These are the tools you need for tying your own flies. Also handy for traveling, because this toolkit comes in a luxury case!

The set contains the following tools: -Clamp Vise -Fine Tip…

High Quality -imi- Regal vise. Great for beginners or as a travel-vise.

UV Lamp - with zoom (395 nm)

Professional quality UV lamp

The lamp has zoom and a wavelength of 395 nm, which is in the top of the UV area, and where it is not harmfull in contrast to the much lower wavelength you find on some…

UV-Glue for making especially saltwater flies, but also nymphs, buzzers and pike flies.

Comes in 2 versions: a Thick version for building bodies and heads, and a Thin version for small flies, final finish on building bodies and…

RAIDZAP BRUSH & NEEDLES – a accessories box that´s including a brush and two syringe needles, to attach on the small bottles. Including rubber lid to put on the needles for safe close.

Squizzers:

- are ultra sharp blades made from surgical steel, guaranteed for life against rust and defects in material and workmanship. Your new Squizzers will be the best cutting tools you will ever own.

- are easy to use -…

Razor sharp and fine point flytying scissors to cut everything very delicately. 4'' inch long.

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tyer Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

A.Jensen Pro Tier Tools

We have worked for almost 3 years to get these tools as we wanted them and now we’re finally satisfied and ready to launch them.

It is a range of 17 tools (so far) for the dedicated fly tier. Among them…

Rock Hard Varnish is the ultimate crystal clear, waterproof varnish on the market. Perfect for heads and rock hard bodies on buzzers

Handy tool to bring material into your dubbing loop.

∙ Clear color plastic clips
∙ Size: 63mm
∙ A pegging hole at the top lets you to hang them anywhere for easy access

This 3-in-1 Half Hitch Tool from C&F Design has three different sized hitchers in one body.

With this tool you turn every vise into a tubefly-vise. (This is a slightly heavier and more luxurious version than the 'normal' tool).

Curious about how it works exactly? ... It is all less difficult than you think. Take a look…

Rotating hackle plier to hackle feathers and other materials.

Thumb Hackle Plier with rubber tip for more grip on feathers

Indispensable tool for easy tying off your fly. Take a look at the video, you'll know how to use this tool.

Extra large whipfinisher for those big streamers and other large patterns.

Rotating whip finisher for bigger flies and streamers.

The finest and the heaviest dubbing teaser. This tool is very nice in the hand. Works very pleasantly when brushing dubbing and other material.

Indispensable tool to get your thread inside your bobbin-holder. I also use this tool in making Snake Flies and tying apps bloodworms with beads.

Fly tying dubbing needle or bodkin. Ofcourse to pick out dubbing underneath the ribbing of your fly. But I always use one extra for all my glue-problems. You can also use the back as half-hitch tool.

Great value quality tools from A.Jensen

A shorter type with ceramic rings.

Basic Ceramic Bobbin Holder. Great value!

Indispensable tool for spinning material in a loop and dub a nice body or colar.

Indispensable tool for stacking deer hair, so the points are equal when tying in the bunch.