A.Jensen 'Spook Seatrout' (NEW)
NEW NEW NEW
Danish design, Scandinavian knowledge!
The ultimate fly rod for demanding flyfisherman for seatrout!
The new Spook Seatrout from A.Jensen is built to meet the standards of the modern saltwater fisherman. These rods are built from the knowledge we have got from earlier big sellers like Spook Stalker, Argon and Seatrout Specialist.
We have upgraded on all flanks, using top of the shelve fitting and raw material. The action is a bit more crisp, that the "old" Spook Stalker, and using 45 tons + IM8 Nanomaterial has ensured an even stronger and lighter version......All efforts was targetting towards designing and making the best possible rod for fishing seatrout in the sea.
And to be honest; we must admit that this model is one that we are really proud of!!!
Kern Leo Lund - Denmark
''Holy S...!!! - That is an awesome rod. I have just received it and first try was a fantastic experience. It sure puts some line out with ease. I'm super satisfied, simply top quality - WAUW!!''
The rods come in the "traditional" 9' length, but also in 8', that has kind of become our trademark the last 8-10 years.
If you have never tried one of these 8' rods before - well we can only urge you to try. Without saying too much, we dare to say that there is a good chance that they will change your opinion what the perfect length for a saltwater rod is.........The 8' models are really powerful, and you get an incredible line speed with them - which will give you long casts and high backcasts that keeps clear of the back. When you lift them for the first time, you will probably think they feel almost too light, like several classes lighter, but that all changes when the line starts flying, and if a big fish takes your fly and brute power is needed, then it really demonstrates its "rhino" backbone.
We designed the rod to be matt black all over, even the guides, to avoid flare and spooking shy fish in skinny water. On top of that we used our SBD (Slim Blank Design) to create a very slim rod that cuts through the wind like a knife, something all still water fishermen appreciate when trying to achieve long casting in windy conditions.
We have used the highest obtainable quality fittings, and adjusted every detail based on field testing along the danish coast.
The SPOOK SEATROUT is a very slim and extremely light rod, with a huge amount of power, yet very delicate and sensitive. Try and lift and shake it – I’m sure you will be amazed by the lightness, and you will for sure be sceptic if classification is right, as it feels several classes lighter.
The SBD (slim blank design) and AHT (advanced helical technology) assure a fast rod with great casting potential on both short and long-distance, and a phenomenal low weight.
45 Tons graphite + IM8 Nano Material
SBD (Slim Blank Design)
Advanced Helical Taper technology
Top quality Portuguese cork handles - Grade AAAA
American Tackles High Performance Titanium Stripping guides
Beautiful reel seat in airspace graded aluminium and top grade cork
Super Hard Chrome double leg snakes and top guides
Dots for correct and easy assembling of rod parts
Supplied in Cordura rod tube
|Length||AFTM||Rec. Shooting head||Weight||Pcs.||Handle|
|8'||6||14 g||73 g.||4||Full Wells + Fighting Butt|
|8'||7||16 g||79 g.||4||Full Wells + Fighting Butt|
|9'||6||14 g||86 g.||4||Full Wells + Fighting Butt|
|9'||7||16 g||90 g.||4||Full Wells + Fighting Butt|
About A.Jensen Flyrods
ONE OF THE TRADEMARKS OF THE A. JENSEN RODS IS THE TIME WE SPEND ON EACH MODEL, BEFORE IT ENTERS THE MARKET. WE WILL RATHER TAKE ONE YEAR EXTRA WITH THE TEST TEAM AND DESIGNERS, THAN FORCE PRODUCTS INTO THE MARKET, THAT WE DON’T HAVE FULL CONFIDENCE IN.
WE DESIGN OUR RODS, BASED ON A PRACTICAL ANGLE TO FLYFISHING. FIRST OF ALL WE ARE FLYFISHERS OURSELF, AND WE WORK WITH THE AIM TO MAKE GREAT EQUIPMENT, IN ORDER FOR YOU TO EXPERIENCE MORE EFFECTIVE FISHING, AND MOST IMPORTANT MORE JOY IN FLYFISHING.
BY OUR TERMS A FLY ROD IS NOT JUST A CASTING TOOL, BUT A TOOL FOR FISHING.
By that we mean that it should handle both the casting and the
joy of fishing and playing a fish at the same time.
Beside that we wanted to create rods, that are able to cast both long lines and shorter lines with full control, as this is one of the crucial aspects of flyfishing. With many modern flyrods you only get the rod properly loaded, with a lot of line outside the top, and only from that point on will you cast with full control. We want our rods to load with short lines, but still be able to cast long lines.
In order to achieve what we want we make a so-called “compensated tip”, meaning a tip that loads quickly. One could make the top of softer material, but then you get a rod action, that feels strange when casting.
Instead we use “Advanced Helical Taper” technology and thereby creating a rod, where the top of the rod loads quickly, without being soft. The “Advanced Helical Taper” technology means changing and opening the angle of the helical wound graphite towards the top. By using the same material, and still under the same amount of tons of pressure as the rest of the blank, we get a rod, that performs with a unique balance.
The quick loading top has many benefits. When fishing shorter lines, such as when fishing dries and nymphs, you will have more accuracy and control.
When fishing stillwaters, both lakes and salts, you will with much ease be able to shoot the first meters of line, as the rod actually cast the line right from the first false cast. There is no “waving” the rod, to get so much line out, that the rod actually loads and casts. Your casting strokes will be more balanced, as you get rhythm right from the start of the cast. It will simply put feel more easy. On top of that the rod is a light and sensitive instrument, and an absolute joy to play a fish on. This brings us back to the where we started – We want to make a fishing rod, not just a casting rod.
All A.Jensen fly rods are covered by a 2 year warranty.
This covers defects due to craftmanship or materials.
If the rod is damaged, please send the rod and the original receipt (received when you buy the rod) to your dealer.
If the damage is covered by the warranty, the rod will be repaired or replaced.
After 2 years, or in case of the damage is not caused by defect due to craftmanship or materials, each part will be charged at a price equal to the recommended retail price divided by the amount of part. Meaning a part from a 4 piece rod cost ¼ of the recommended retail price of that rod.
Important: The warranty only applies to the original owner and the owner must be able to present the original receipt of the purchase. Resold rods are not covered by this warranty.